Rear Axle Repair Sleeve

IF YOU HAVE ever pulled off a Side Bell on your Rear End and found a groove in the seal surface of your Rear Axle....it means one thing, your vent doesn’t release enough pressure in the housing and that pressure has caused the seal to cut a groove in the Aluminum surface. Solution, the BR Axle Repair Sleeve. Made from ultra thin heat treated stainless and easy to install...just fill the groove in the Axle with ATV Silicone, slide the Repair Sleeve on the Axle (Flange First), then take a piece of the 3” Schedule 40 PVC Plastic Pipe 28” to 36” long and tap the Sleeve down over the race surface, and you are done!! Quick and easy! Remember That Groove Can Cause A Crack And That Spells Trouble!